Sunday, July 21, 2013

Dirt Bag Hone

Modify or adapt parts or gear is something I admit I have no reluctance to doing now days.  Sometimes it is a cost saving measure or in the case of this Hone rear derrailleur...if a mod isn't found it becomes scrap.

 I must give a nod to Dr Jon Meredith's blog...The Seriel Driller. Who's blog I have been reading this year and has been giving me ideas to improving gear or coming up with fixes to what for me a problems with things. And in this case a Shimano Hone derrailleur was the problem.

I was given a Hone rear derrailleur a little while ago not in working order.  It was missing that bit that allows it to use a 10mm thru axle. So without that bit is was pretty much scrap once the pulleys where removed. Kind of a waste really. Especially when I need a derrailleur as my old one was starting to admit defeat.



 And after ordering the Hone B spring rebuild kit came up with the next problem. That being a bolt to make it all work as the derrailleur body is slightly wider then is found in others. So after pulling the mounting bolt from a dead one it was to Fastenal. Who have never yet failed to find a bolt that will work.


 Had to take a risk though as without having the bolt in front of me to double check it would work. In the end they came through as always. But part of doing mods like this is the risk that what might be a solution may not actually work out.


 So after some dry mounts using and old frame to work it all out. Really to test if there would be enough spring tension to work properly as it was the Hone was never designed to work this way. To work without the thru axle mount. So once dry test was done it was to work mounting it on the Mistress.


 Though I think I cut the housing a wee bit longer then planned it still works and shifts well.  Especially with another part it was never meant to work with. A Shimano XT....thumbshifter.


 It did take a little getting used to using the rapid rise, meaning you shift the opposite direction as is normal. And sometimes I do forget that and shift the wrong way. But it is nice to shift easier to bigger gears. So I think I will be trying to acquire a few rapid rise derrailleurs in the future. And I will in the future working on the shifter mount.

Sunday, March 17, 2013

5.10's and Glue

Got my hands on a pair of 5.10 Impacts back in the beginning of summer 2011 used. Still had lots of life and great shoes really. Did as advertised and stick to the pedals great. But like most things in life use in the end wears things out or causes damage.


The winter pic was in February of 2012. I didn't realize till later when I changed out of riding gear that the left shoes was failing..the glue holding everything together was finally giving up. Of course this happens at a tight fiscal time. So what do I do? Suffer with nothing or find a solution?
 At the time went by my local Canadian Tire and found Shoe Goo. And after a few days of slowly gluing everything back together . Was back in business. Of course this will start to fail a bit at a time, So one will have to apply more every now and then.

 The most recent fix was a for a chunk that came out and use Gorilla Glue this time as it was in the back section. After allowing it to dry over a couple of day's. Back in use again.

 Now this isn't a permament solution as it will either continously need regluing or will simply fully die off. Reality si I will need to get another pair though the best plan is to have a couple of pairs like I do SPD shoe's. As it allows the use to be spread out and not concentrated on one pair only.

Tuesday, September 25, 2012

Value Village Saddle

While wandering around Value Village for something else. Saw this in a bin in their sports section. Pretty much new and never used it seems for the princely sum of $3.99 Canadian.





 It does take a bit of work and you don't find anything all the time in places like Value Village or Goodwill stores. But if you do keep checking you will see something.

Wednesday, March 14, 2012

Rusty Bolts

Had a couple of rusty brake mounting bolts. Got the same treatement as the caliper part... drill with wire brush.


Just beginning on the first bolt.



Part way through the first.



Part way through and you can see the difference between the two.

Monday, March 12, 2012

Rusteeze

Needed to clean up part of a mechanical disc brake. Specifically the wheel side of the caliper where the threaded plate is.

Cordless drill with wire wheel.


You can see the rust from use. This will eventually sieze up and become unusable. Especially since it moves rarely compared to the non wheel side of the caliper.



And the result of a few minutes work can bee seen here.


Saturday, February 4, 2012

Cheap Clear Lense Glasses

3 years ago working at base gym was about to leave at the ed of my shift. Noticed the wind had picked up and was snowing. Realizing I had forgotten my riding glasses at home. Checked the lost and found.. found these. There for Racquet Ball but they worked well. And still do.

Friday, January 20, 2012

Drilling Plastic

Got a new seatube mounted chain guide from Superstar Components. Of course unlike some I'm not expecting Superstar to be Kreskin and devine that I want to keep my bashguard on. So it was off to the shop for mod with a Dremel and file.


First cut off the now superflous nub where the rear nut and bolt where.



First mounting without the outer plate.




Next was to take the outer part and cut what in the pic is the upper plastic... if it was mounted the thin piece would be over the chain ring. Careful Dremel use and smoothing with the file...
And the final result is a guide that will work with my Kooka bashguard.


Friday, December 23, 2011

Dirtbag Shadow

Simple solution for dealing with that housing loop.


All it is is a standard noole from V Brakes. Solves the whole annoying loop and the shifting issues it causes.

Saturday, November 26, 2011

Dirt Bag Rim Tape

After finishing the new front wheel build it was time to rim tape the rim. Some will say this doesn't work but it works fine for me. I find simple electricians tape does well for this task.

First make sure to wipe the surface down to clean out any gunk. Then just past the valve hole start.



Make 3 or four passes around the entire rim. Try to keep it as centered as possible and covering the spoke holes. If not it increases the chances of the metal cutting your tube. Which we all know makes for a long walk home. Once completed find the valve hole and with a phillips head screw diver poke a hole in the tape for the valve.




This is also the starting point for the Dirtbag Tubeless system which will be a future project.

Tuesday, November 22, 2011

Helmet Retention Repair

The day after my last ride I discovered that part of the Detox Retention system on my Fox Flux helmet had snapped. Fortunately this after a bit of thought was easy to fix.


At work pulled out the Gorilla Glue. Great stuff and seems to help reglue so much back together.

As you can see in the photo below the Detox had snapped on the plastic ridged piece. As I mentioned at the beginning it was fortunate that where it snapped was on one side so allowed for the potential to repair.



First had to measure and trim a bit from the part that stayed inside the Detox adjuster- That being the clear bit. Simple trim using a pair of regular electrical type wire cutters. After that drippled in a bit of Gorilla Glue. After giving it a few minutes to sit added a bit more gluile to it. Then inserted the plastic in until it clicked int place.

Then waited a few hours till the glue dried. This has fixed the broken bit and the Detox system works.

Saturday, November 19, 2011

Brake Mount DIY

Got myself a set of Hope Enduro type brakes. Only issue was that the caliper mountings where for a different bracket system. So it was time for a bit of fabricating and modifying.

Dug through the brake part bin for a couple of brackets, longer 5mm bolts, nd a pile of V Brake washers. After a bit of trial and error to see how it would all fit together. Had a general idea. First proble was the upper bracket would interfere with the disc. Easy to solve by sticking the bracket in the vice. Then carefully hacksawing off the bit that was interfering. Then of course it had to be filed down to remove any sharp edges.



Remounted everything. Went together no problem. Well, it seems so initially until I spun the wheel and was met with the sound of the disc rubbing against the caliper. After a closer inspection I found out that the upper part- camera left was the problem. A swap out of the thin washer for the thicker one solved the problem.

And after work went for a post work spin. And it worked perfectly.


Tuesday, November 15, 2011

Headlamp Cable holder

I needed to have something on the back of the helmet to hold the cable for the helmet light. Other wise the cable to flop around every where and in general be annoying.

Solution was a piece of stretch cord cut and tied around the back of the helmet. A simple solution.

Sunday, November 6, 2011

Stunt Traction

Needed to add some traction to a section of ramp. Sure I could go to the local Home Depot for material. Or I could reuse a dead tire. So after cutting off the unusable sidewalls. And cutting into easier to transport sections. Laid them out and nailed in lace.




Worked perfectly for nill cost other then some labour to cut away the unusable bits.

Saturday, November 5, 2011

Carb Drink

Simple to make really. Kenyan runners mix this after a run work out.

1 standard water bottle filled with water
1 teaspoon sugar

Add sugar to water and shake. Put the lid back on of course.

Thursday, November 3, 2011

Iskiate

Simple to make.

8 oz water
2 teaspoons sugar
2 teaspoons Chia seeds
quarter piece of lime.

Squeeze Lime so the juice goes nto the water. Add the sugare and Chia seeds. Shake and enjoy.